The Bambu Lab P2S and Qidi Tech Q2 are cross-brand rivals: both are prosumer-tier printers, listed $50 apart. Both are enclosed CoreXY printers with 4-slot multicolor, a 600 mm/s rated top speed and automatic calibration. The P2S costs $50 more, without a hardware advantage on the specs we track; the Q2 answers with 11% more build volume.
Early in release cycle — no urgency to wait
Best for: Serious makers and prosumers who need enclosed printing for ABS, ASA, PA, PA-CF, and PC — and want Bambu's plug-and-play experience at a prosumer price.
Full details →Overdue for a refresh — no successor announced yet. Prices should be at their lowest
Best for: Makers and engineers who need reliable printing in ABS, ASA, PA, or carbon-fiber composites and want the best-value enclosed printer under $500.
Full details →| Bambu Lab P2S | Qidi Tech Q2 | |
|---|---|---|
| Pricing | ||
| Starting Price | $549 | ★ $499 |
| Print Specs | ||
| Tier | Prosumer | Prosumer |
| Motion | CoreXY | CoreXY |
| Build Volume | 256 × 256 × 256 mm | ★ 270 × 270 × 256 mm |
| Max Speed | 600 mm/s | 600 mm/s |
| Multicolor | ✅ 4 slots | ✅ 4 slots |
| Enclosure | ✅ | ✅ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ❌ |
| Upgrade Kit | — | — |
| Buy Timing | ||
| Released | Oct 14, 2025 | Aug 20, 2025 |
| Cycle length | ~832 days | ~518 days |
| Cycle advice | Buy | Wait |
| Deals advice | Buy | Buy |
| Next model | P3S or next prosumer model (Expected late 2027) | — |
The P2S was released on Oct 14, 2025, 394 days ago. Based on Bambu Lab's release cadence, we expect the next model (P3S or next prosumer model) around late 2027 — about 323 days away, which puts the P2S 55% of the way through its cycle.
The Q2 was released on Aug 20, 2025, 449 days ago. Its previous release cycle ran about 518 days, so it is 87% of the way through — roughly 69 days before a successor would be due at that pace.
On timing alone, the P2S is the safer buy right now — it is only 55% of the way through its expected cycle, while the Q2 is late in its cycle (87% through).
Cycle and deal status as of November 12, 2026. See the launch calendar →
The Q2 lists at $499 and the P2S at $549 — $50 apart, so the P2S costs 10% more.
Per litre of build volume, that works out to $33 for the P2S versus $27 for the Q2 — the Q2 is both cheaper and roomier, so it wins on value outright.
With both in sale windows until Dec 5, 2026, this is a good moment to buy either — compare the live sale prices before you decide.
Our pick for most buyers is the P2S, for a higher editor score (9.2 vs 8.2) and better buy-now timing. Go for the Q2 instead if you want to spend less — it is $50 cheaper ($499 vs $549).
How we judge timing and deals: read our methodology →
The P2S enclosure maintains a more consistent chamber temperature over the P1S, reducing warping on long ABS and PA prints.
PLA through PC — the P2S handles the entire engineering filament spectrum with reliable results.
The P-series CoreXY enclosure design strikes the best balance of price, speed, and material capability in Bambu's lineup.
The Q2 actively heats the print chamber — not just passively traps heat. This is the key differentiator for reliable ABS, ASA, PA-CF, and PC printing without warping.
Triple-stage filtration removes 99.5% of particulates and VOCs — essential for printing ABS and ASA in a home or office environment.
Handles the full spectrum of engineering filaments including carbon and glass fiber composites without a hotend upgrade.