The Bambu Lab P2S and Qidi Tech Plus5 are cross-brand rivals: both are prosumer-tier printers, listed $200 apart. Both are enclosed CoreXY printers with 4-slot multicolor, a 600 mm/s rated top speed and automatic calibration. The Plus5 costs $200 more and gets you 83% more build volume and extra engineering materials (PPS-CF).
Early in release cycle — no urgency to wait
Best for: Serious makers and prosumers who need enclosed printing for ABS, ASA, PA, PA-CF, and PC — and want Bambu's plug-and-play experience at a prosumer price.
Full details →Just released — full support runway ahead
Best for: Makers and small businesses who need a large enclosed build volume for engineering materials at a prosumer price — particularly those printing PA-CF, ABS, and PC at scale.
Full details →| Bambu Lab P2S | Qidi Tech Plus5 | |
|---|---|---|
| Pricing | ||
| Starting Price | ★ $549 | $749 |
| Print Specs | ||
| Tier | Prosumer | Prosumer |
| Motion | CoreXY | CoreXY |
| Build Volume | 256 × 256 × 256 mm | ★ 320 × 320 × 300 mm |
| Max Speed | 600 mm/s | 600 mm/s |
| Multicolor | ✅ 4 slots | ✅ 4 slots |
| Enclosure | ✅ | ✅ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ❌ |
| Upgrade Kit | — | — |
| Buy Timing | ||
| Released | Oct 14, 2025 | Aug 5, 2026 |
| Cycle length | ~832 days | ~684 days |
| Cycle advice | Buy | Buy |
| Deals advice | Buy | Buy |
| Next model | P3S or next prosumer model (Expected late 2027) | — |
The P2S was released on Oct 14, 2025, 394 days ago. Based on Bambu Lab's release cadence, we expect the next model (P3S or next prosumer model) around late 2027 — about 323 days away, which puts the P2S 55% of the way through its cycle.
The Plus5 was released on Aug 5, 2026, 99 days ago. Its previous release cycle ran about 684 days, so it is 14% of the way through — roughly 585 days before a successor would be due at that pace.
Both are early enough in their cycles that timing should not decide this one. The P2S has roughly 323 days of runway on past cadence and the Plus5 has roughly 585 days of runway on past cadence. Pick on features and price.
Cycle and deal status as of November 12, 2026. See the launch calendar →
The P2S lists at $549 and the Plus5 at $749 — $200 apart, so the Plus5 costs 36% more.
Per litre of build volume, that works out to $33 for the P2S versus $24 for the Plus5 — so the pricier Plus5 actually gives you more build space per dollar.
With both in sale windows until Dec 5, 2026, this is a good moment to buy either — compare the live sale prices before you decide.
Our pick for most buyers is the P2S, for a lower price ($200 less), plus a higher editor score (9.2 vs 8.4). Go for the Plus5 instead if you print large parts — its 320 × 320 × 300 mm build volume holds 83% more than the P2S's 256 × 256 × 256 mm.
How we judge timing and deals: read our methodology →
The P2S enclosure maintains a more consistent chamber temperature over the P1S, reducing warping on long ABS and PA prints.
PLA through PC — the P2S handles the entire engineering filament spectrum with reliable results.
The P-series CoreXY enclosure design strikes the best balance of price, speed, and material capability in Bambu's lineup.
An 18% larger build volume than the Plus4's 305×305×280 mm, in the same enclosed prosumer class.
A 550 W third-generation chamber heater holds 65°C for PA, PA-CF, ABS, ASA, and PC with minimal warping across the build plate.
Handles high-performance engineering composites including carbon- and glass-fiber reinforced filaments and PPS-CF without a separate hotend upgrade.