The Qidi Tech Plus5 and Sovol SV08 are cross-brand rivals: both are prosumer-tier printers, listed $220 apart. Both are CoreXY printers with automatic calibration. The Plus5 costs $220 more and gets you an enclosed chamber (with PA-CF and PPS-CF on its materials list) and 4-slot multicolor; the SV08 answers with 38% more build volume and an open-source design.
Just released — full support runway ahead
Best for: Makers and small businesses who need a large enclosed build volume for engineering materials at a prosumer price — particularly those printing PA-CF, ABS, and PC at scale.
Full details →First-generation product — no release history to base predictions on
Best for: Klipper enthusiasts, Voron fans who want a pre-built shortcut, and makers who want maximum build volume and open-source firmware at a prosumer price — without the DIY build time of a true Voron kit.
Full details →| Qidi Tech Plus5 | Sovol SV08 | |
|---|---|---|
| Pricing | ||
| Starting Price | $749 | ★ $529 |
| Print Specs | ||
| Tier | Prosumer | Prosumer |
| Motion | CoreXY | CoreXY |
| Build Volume | 320 × 320 × 300 mm | ★ 350 × 350 × 345 mm |
| Max Speed | 600 mm/s | ★ 700 mm/s |
| Multicolor | ★ ✅ 4 slots | ❌ No |
| Enclosure | ★ ✅ | ❌ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ★ ✅ |
| Upgrade Kit | — | — |
| Buy Timing | ||
| Released | Aug 5, 2026 | Jun 1, 2024 |
| Cycle length | ~684 days | — |
| Cycle advice | Buy | Caution |
| Deals advice | Buy | Buy |
| Next model | — | — |
The Plus5 was released on Aug 5, 2026, 99 days ago. Its previous release cycle ran about 684 days, so it is 14% of the way through — roughly 585 days before a successor would be due at that pace.
The SV08 was released on Jun 1, 2024, 894 days ago. It is a first-generation product, so there is no earlier cycle to predict its successor from.
On timing alone, the Plus5 is the safer buy right now — it is only 14% of the way through its expected cycle, while the SV08 has no release history pointing to a successor yet.
Cycle and deal status as of November 12, 2026. See the launch calendar →
The SV08 lists at $529 and the Plus5 at $749 — $220 apart, so the Plus5 costs 42% more.
Per litre of build volume, that works out to $24 for the Plus5 versus $13 for the SV08 — the SV08 is both cheaper and roomier, so it wins on value outright.
Our pick for most buyers is the Plus5, for an enclosed chamber (with PA-CF and PPS-CF on its materials list) and 4-slot multicolor, plus a higher editor score (8.4 vs 8.1) and better buy-now timing. Go for the SV08 instead if you want to spend less — it is $220 cheaper ($529 vs $749).
How we judge timing and deals: read our methodology →
An 18% larger build volume than the Plus4's 305×305×280 mm, in the same enclosed prosumer class.
A 550 W third-generation chamber heater holds 65°C for PA, PA-CF, ABS, ASA, and PC with minimal warping across the build plate.
Handles high-performance engineering composites including carbon- and glass-fiber reinforced filaments and PPS-CF without a separate hotend upgrade.
7 linear rails, 4 independent Z motors with Quad-Gantry Leveling, and a flying CoreXY gantry — the core architecture of the Voron 2.4, pre-assembled and ready to print.
Ships with Klipper pre-configured with Input Shaper, Pressure Advance, adaptive mesh bed leveling, and Obico remote monitoring — no configuration required to start printing.
One of the largest open-frame CoreXY build volumes at this price tier. The AC-powered bed heats quickly and handles ABS, ASA, PC, and PA with a 300°C capable hotend.