The Bambu Lab A2L and Qidi Tech Plus5 are cross-brand rivals: both are prosumer-tier printers, listed $280 apart. The Plus5 costs $280 more and gets you an enclosed chamber (with ASA, PA, PA-CF, PC and PPS-CF on its materials list) and a top speed of 600 mm/s (vs 500); the A2L answers with 12% more build volume.
First-generation product — recently released, still early days
Best for: Makers who want the largest possible open-frame build volume on a budget — large cosplay, terrain, and functional parts — with optional multicolor via AMS Lite.
Full details →Just released — full support runway ahead
Best for: Makers and small businesses who need a large enclosed build volume for engineering materials at a prosumer price — particularly those printing PA-CF, ABS, and PC at scale.
Full details →| Bambu Lab A2L | Qidi Tech Plus5 | |
|---|---|---|
| Pricing | ||
| Starting Price | ★ $469 | $749 |
| Print Specs | ||
| Tier | Prosumer | Prosumer |
| Motion | BedSlinger | CoreXY |
| Build Volume | ★ 330 × 320 × 325 mm | 320 × 320 × 300 mm |
| Max Speed | 500 mm/s | ★ 600 mm/s |
| Multicolor | ✅ 4 slots | ✅ 4 slots |
| Enclosure | ❌ | ★ ✅ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ❌ |
| Upgrade Kit | — | — |
| Buy Timing | ||
| Released | Jun 1, 2026 | Aug 5, 2026 |
| Cycle length | — | ~684 days |
| Cycle advice | Buy | Buy |
| Deals advice | Buy | Buy |
| Next model | — | — |
The A2L was released on Jun 1, 2026, 164 days ago. It is a first-generation product, so there is no earlier cycle to predict its successor from.
The Plus5 was released on Aug 5, 2026, 99 days ago. Its previous release cycle ran about 684 days, so it is 14% of the way through — roughly 585 days before a successor would be due at that pace.
Both are early enough in their cycles that timing should not decide this one. The A2L launched 164 days ago and the Plus5 has roughly 585 days of runway on past cadence. Pick on features and price.
Cycle and deal status as of November 12, 2026. See the launch calendar →
The A2L lists at $469 and the Plus5 at $749 — $280 apart, so the Plus5 costs 60% more.
Per litre of build volume, that works out to $14 for the A2L versus $24 for the Plus5 — the A2L is both cheaper and roomier, so it wins on value outright.
With both in sale windows until Dec 5, 2026, this is a good moment to buy either — compare the live sale prices before you decide.
Our pick for most buyers is the A2L, for a lower price ($280 less) and 12% more build volume, plus a higher editor score (9.0 vs 8.4). Go for the Plus5 instead if you want to print ASA, PA, PA-CF, PC and PPS-CF — it is enclosed and lists them, while the A2L is open-frame.
How we judge timing and deals: read our methodology →
Bambu's largest bed-slinger build volume, big enough to print full-size helmets and large props in a single piece rather than in glued sections.
The A2L stores several calibration sets at different heights up the Z axis to keep the faint vertical banding of tall bed-slinger prints under control.
An add-on blade-cutting and pen module extends the A2L beyond printing for sticker cutting and plotting workflows.
An 18% larger build volume than the Plus4's 305×305×280 mm, in the same enclosed prosumer class.
A 550 W third-generation chamber heater holds 65°C for PA, PA-CF, ABS, ASA, and PC with minimal warping across the build plate.
Handles high-performance engineering composites including carbon- and glass-fiber reinforced filaments and PPS-CF without a separate hotend upgrade.